Clamp Handrail

The Pipe Clamp range is a new modular system used by various industries due to its versatility.

Enquire Now Online Shop

Customisable

Reconfigurable – PipeClamp can be disassembled and reassembled into different configurations.

Cost Effective

Easy to design and install, weldless (no hot works permit).

Reusable

The PipeClamp system can be relocated and reused as required.

Permanent or Temporary

Guardrails, Staircases, Trolley Bays, Handrails and more.

The Pipe Clamp range is a new modular system used by various industries due to its versatility. The range allows for many combinations for the system to be used across many applications. The Pipe Clamp system is cost-effective compared to traditional welded systems and is reconfigurable, allowing the products to be relocated and reused.

Benefits of using Pipe Clamps:

Modular system allowing for customised solutions
Used across many applications
Cost-effective compared to welded systems
Easy to design and simple to install
Dual coating for durable corrosion resistance – electroplated over a galvanised finish
A powder-coated finish is also available
Reconfigurable – can be disassembled and reassembled
Weldless – no hot works permit required
Compatible with the use of 40NB pipe (48mm outside diameter)
Vibration resistant.

Applications

Suitable applications include:

Barriers and Handrails
Balustrades
Handrails for Mezzanine floors & staircases
Permanent or temporary guard rails
Playground equipment
Sports goals
Shopping trolley bays
Agriculture enclosures.

Technical Information

Maximum post spacings is 2m
Grub screws must be tightened to 39Nm
Fittings should be assembled with grub screws pointing downwards if possible to minimise water retention.
Do not weld or cut fittings
40NB x 3.2mm galvanised pipe is recommended for all outdoor installations
Fittings are not suitable for scaffolding
When installed as a handrail, the knee rail should not be set higher than 560mm.